Guys:
As you may know, there are a few members here (and elsewhere) that have done the 3.5L upgrade. As of today's date, only the Type-S has received these engine swaps/hybrid builds (that I know of at any rate). So the question begs to ask: what about the lowly TL-P? Good news, we can do the swap as well.
I've asked 02AV6 (a member of V6P.net) for advice on what to do with respect to a 3.5L upgrade for our TL-P. Here is his reply:
Quote: You can get just 01-02 MDX complete short block (crank/rods/pistons/oil pan) and install you stock cyl. heads on it.
And this is an ideal solution for power gain but would need CL-S ECU 5AT.
BLOCK/HEADS
J35A3/J32A2 ('01-02 MDX/CL-S '01-03) or J35A4/J32A2 (Odyssey '02-04/CL-S '01-03)
advantage: great entire powerband and especially torque.
disadvantage: Need CL-S or RL pistons.
There are also couple options:
Option 1
With '01-02 complete MDX block or '02-04 Odyssey complete block (crank/rods/pistons) it is required to purchase 2005 Acura RL pistons (new set $50 each) This is a best option still since these pistons have clearance for large 36mm J32A2 (intake) valves thus no modification needed. Despite the fact they have higher 11.0:1 CR still even supercharger can be used here with low boost up to 7psi intercooled (assuming safe AFR). In addition, if 11:1 CR is too high for you, you can use '03 CL-S pistons with 10.5:1 CR.
Option 2
'01-03 J32A2 block (CL-S)
Required to purchase the following:
-= hondaautomotiveparts.com =-
'02-'04 Odyssey (crankshaft)
Product No. 368270 or
Honda part #13310-PGK-A00
'02-'04 Odyssey (connecting rod)
Product No. 368269 or
Honda part #13210-PGK-A00
Main bearings + rod bearings
-= acuraautomotiveparts.org =-
'03 CL-S (pistons) - 10.5:1 CR or
'05 RL (pistons) - 11.0:1 CR
pistons rings (per chosen model)
Note: Odyssey pistons do not have clearance to fit large 36mm J32A2 (intake) valves. Solution - custom job to increase valve pockets.
BTW, The only advantage to get J32A2 block is due to better cylinder sleeves to withstand heat designed for higher redline vehicle, otherwise depending on the price Odyssey or MDX block are the best bet.
Keep in mind, J35A5 '03-04 MDX will not fit on 6th gen. AV6/CL/TL/CL-S/TL-S due to different design, and looks like only for 7th gen. AV6.
Special thanks to 02AV6 for your detailed instructions.
For additional details regarding where I got this info from, see link below:
http://www.v6performance.net/forums/...1&page=1&pp=30
Вот на такую статейку наткнулся, сколько в таком моторишке сил и потенциала ?
